Intelligent inverter intermediate frequency spot welding machine
Model: fwt-10000
Product Description:
◆It can output 1500 solder joints per minute;
◆1KHZ、2KHZ、4Khz、8kHz、10KHZ、20KHZ Inverter frequency, high control precision, welding time can be accurate to 0.25 ms or 0.125 Ms;
◆LCD display intuitive, touch LCD display, easy to operate;
◆Constant current, constant voltage, constant power, constant pulse width and other control modes are suitable for welding of various materials and products;
◆Three stage discharge heating mode, current slow rise and slow drop control;
◆Set parameter upper and lower limit current monitoring;
Features of intermediate frequency inverter resistance spot welding machine:
1、The welding current is pulsating DC (with small waviness);
2、IGBT inverter frequency is 1 ~ 8kHz, power on time control cycle is 0.125ms, discharge time can be adjusted and controlled arbitrarily;
3、It can monitor current, voltage and power in real time;
4、It has the function of fault diagnosis and alarm such as current abnormality, monitoring value overrun, network voltage overrun, overheat, etc., which can greatly reduce the defective rate of product welding.
5、Three stage discharge setting, with the function of slow rise and slow drop of current, can effectively solve "spatter" and ensure the stability of welding.
6、The electrode life can be effectively prolonged. Energy saving is more than 50%.
Scope of application:
Widely used in copper, nickel, stainless steel and other non-ferrous metals and electronic devices, precision instruments, low-voltage electrical appliances and light industry, home appliances and other industries.
Property of intelligent inverter intermediate frequency spot welding machine | |||||
Name of machine: | Intermediate frequency spot welding machine | Load duration: | 90% | Model weight: | 100KG |
Brand manufacturers: | Fuweite Welding Machine | Input voltage: | 380V | Machine size: | Length 550*width790*high 1350 |
Mechanical model: | FWT-10000 | The output voltage: | 9 V | Welding ability: | 2+2mm |
rated power: | 60KVA | Start method: | Pedal | cooling method: | Wind cooling |
Cylinder stroke: | 63*75 | Pressure control: | Air pressure | Welding time: | 0.1-3 seconds |
Performance characteristics: The electrodes are on the upper and lower sides, the upper and lower butt welding single-point welding operations, the foot switch, manual discharge, simple and convenient operation; microcomputer control, precise and durable. | |||||
Product use: It has a wide range of uses, especially suitable for welding of metal plates, wires and wires with good electrical and thermal conductivity such as aluminum, copper, stainless steel, high temperature alloys, (nickel) tungsten, and welding between dissimilar metals. Such as: welding of thermocouples, various types of sensors, switches, silver contacts, resistors, capacitors, condenser microphones, toys, clock motors, stainless steel, copper sheets, copper wires, carbon brushes, etc. |